PTFE,Teflon Products:
Aidmer76-050RX Extruded PTFE Teflon Rod -
Aidmer76-050RM Molded Teflon Bar -
Aidmer76-050G Filled Teflon Rod -
Aidmer76-050M Molded Teflon Sheet -
Aidmer76-050S Skived Teflon Sheet -
Aidmer76-050R Filled Teflon Sheet -
Aidmer76-050HM Molded Teflon Tubing -
Aidmer76-050HS Extrusion Teflon Tubing -
Aidmer76-050HF Filled Teflon Tubing -
Aidmer76-050H Extrusion Teflon Hose -
Aidmer76-110 Teflon Gasket -
Aidmer76-112 Film Teflon -
PTFE gland packing-Aidmer76-023

Polytetrafluoroethylene (PTFE) Rod
AIDMER 76-050RX
AIDMER 76-050RM
AIDMER 76-050G
Characteristic of the products
There are two types of PTFE rod. The rod with diameter of 4—9mm is made by paste extrusion with dispersion polymerized PTFE resin; Another one with diameter of 10~50mm is made by ram extruding method with suspend polymerized PTFE resin; Rods over the diameter 50mm are manufactured by moulding.
PTFE has a wide range of practicable temperature from -180℃～+260℃ and a wax-like surface to which anything hardly sticks.PTFE has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics.
Specification and Main technical indicator
Project Name Unit Result
Apparent Density g/cm3 2.1 ~ 2.3
Tensile Strength Mpa ≥ 14.0
Ultimate Elongation % ≥ 14.0
Dia. ( mm ) 20, 25, 30, 40, 55, 60, 65, 70, 75, 80
85, 90, 95, 180, 200, 250, 270, 300
Length ( mm ) 100mm, 300mm,1000mm,2000mm
Use of the products

The electrical insulation used under various kinds of frequency, the seal liner of various kinds of corrosively medium, antisticking materials, lubrication material.